Technology News

General process of lighting design Ⅱ

Author : Rise Lighting Amy

Update time : 2023-07-13 15:34:28

3) Lamp choose

After the preliminary design approval, provide detailed lighting fixture layout, choose instructions, lighting control circuit, detailed drawings, final lighting analysis report, and technical requirements for lighting fixture bidding. Collect catalogs of lighting vendors from around the world and be familiar with the latest products. The choice of lamps is not only focused on their effect, quality, quantity and price, but also the convenience of purchasing lamps in each country and the local technical requirements. The manufacturer will provide most of the lamp catalogs and specifications for choice. The specifications of each lamp will include a brief introduction, manufacturer's number, type of light source, wattage, surface quality, installation location, quantity, and contact information of the manufacturer or supplier.

4) Intelligent optical control

Collect and enrich the list of control systems, including Photosystem around the world. The selection of regulatory systems will be formulated based on the nature and needs of individual projects. The control system mainly connects the switch circuit of the central automation system or the dimming circuit of dimming. If necessary, light regulation or time switch can be used in conjunction with the regulation system. All control circuits will have a domain list, specifying the type of control system, type of panel, number of circuits, load, dimming specifications, and manufacturer's contact phone number.

5) Budget bidding

The above information about lighting fixtures and lighting control can be bound into a volume, with budget references for bidding or procurement purposes.

6) Construction plan

When the required lighting fixtures cannot be choosen in the manufacturer's catalog, the detailed design instructions on the design drawings and production needs will provide information for the manufacturer or contractor to produce specially designed lighting fixtures. If the lighting fixtures need to be installed in specially designated positions and methods, corresponding instructions should also be provided on the design drawings. The detailed drawings for the production and installation of all specially manufactured lighting fixtures will be provided by the manufacturer or contractor and approved by the lighting consultant.

Previous : Some things about waterproof led panel lights

Next : General process of lighting design Ⅰ

The difference between rgbw and rgb in our life

Dec .02.2023

The use of RGB light sources in our daily lives is becoming increasingly widespread, whether it is used as conventional lighting fixtures or led strip, it is a good product for rendering the atmosphere. Let's learn what they are in this article.

Something about IK Rating for LED Lighting

Aug .26.2023

We all know that in the lighting industry, in addition to the IP rating, there is also an important factor that is the IK protectrating. This article discusses the IK level.

The difference between triac dimming and 0-10v dimming

Aug .12.2023

What is a 0-10V dimming power supply, does it mean its voltage is 0-10V? What is the difference between 0-10V dimming and thyristor dimming?

Why do full spectrum LED lights have high color rendering index?

Jul .20.2023

Full spectrum LED eye protection lights, due to the completion of all spectral bands, improve the color reproduction of brighter colors which the ordinary LED lamp cannot achieve, resulting in higher CRI.